Category: Pool Pump Won’t Stay Primed
A pump that won’t hold prime is drawing air on the suction side. This section covers every source of suction-side air intrusion — lid O-rings, low water level, loose fittings, cracked housing, and skimmer problems. Guides include step-by-step diagnosis using the shaving cream test and specific repair instructions for each cause.
-
Read the Guide →: Pool Pump Won’t Stay Primed — Finding the Suction-Side Air Leak
Quick Answer: If the pump primes fine but loses prime again within minutes or hours, the problem isn’t your priming technique — it’s a suction-side air leak pulling air in… Read the Guide →
-
Read the Guide →: How to Prime a Pool Pump — Step-by-Step for Every Situation
Priming a pool pump means filling the housing with water so the impeller has something to pull. The correct sequence: fill the strainer housing completely with a garden hose, seal… Read the Guide →
