Author: Keith S
-
Read the Guide →: Variable Speed Pool Pump Won’t Reach Full Speed — Causes and Fixes
Variable speed pump running but capped well below its rated RPM? Here’s how to check programming, voltage, and flow restriction before assuming the drive has failed. Read the Guide →
-
Read the Guide →: Pool Pump Surging or Pulsating Flow — Causes and Fixes
Water flow rising and falling in a rhythmic pattern instead of just being weak? Surging and pulsating flow has different causes than steady low pressure — here’s how to tell… Read the Guide →
-
Read the Guide →: Do I Need a Surge Protector for My Pool Pump?
Considering a surge protector for your pool pump, especially a variable speed model? Here’s what it protects against, where to install it, and what it costs versus a replacement drive. Read the Guide →
-
Read the Guide →: What Size Breaker Does a Pool Pump Need?
Sizing a breaker for a new pool pump install or replacement? Here’s how the NEC 125% rule works, typical breaker sizes by pump type, and why a dedicated GFCI circuit… Read the Guide →
-
Read the Guide →: Hayward TriStar VS Error Codes — What Each Code Means
Hayward TriStar VS showing error 64, 65, or PFC-Hi? Here’s what each TriStar VS error code means and the exact reset procedure to clear it. Read the Guide →
-
Read the Guide →: Jandy VS FloPro Error Codes — What Each Code Means
Jandy VS FloPro showing an error code on the display? Here’s what E01, E22, E23, E2E, E2F, and RS-485 communication errors actually mean and how to fix each. Read the Guide →
-
Read the Guide →: Pool Pump Running Backwards — Causes and How to Fix It
Suspect your pool pump is running backwards? Here’s what’s actually possible on a residential single-phase motor, and what’s really causing the reduced flow you’re seeing. Read the Guide →
-
Read the Guide →: Pool Pump Air Lock — How to Break It and Restore Flow
Pool pump surging and struggling to prime instead of just losing prime slowly? You may have an air lock, not a leak. Here’s the difference and how to clear it. Read the Guide →
-
Read the Guide →: Bestway Pool Pump Troubleshooting — Flowclear Common Problems and Fixes
Bestway Flowclear pump not turning on, running weak, or cutting in and out? Here’s how to diagnose and fix the most common Bestway above-ground pump problems. Read the Guide →
-
Read the Guide →: Inground vs Above Ground Pool Pump — Key Differences Explained
Above-ground pool pumps are typically smaller (1/3–1.5 HP), use flexible hose connections instead of rigid PVC unions, and sit above the water level — meaning they fight gravity and lose… Read the Guide →
-
Read the Guide →: Pool Pump O-Ring Sizes Guide — How to Identify and Order the Right One
A pool pump has 4–6 different O-ring locations, each with its own size and cross-section profile that are not interchangeable with each other. The fastest, most reliable way to order… Read the Guide →
-
Read the Guide →: Pool Pump Drain Plug Stuck or Stripped — How to Remove It Safely
Plastic pool pump drain plugs strip easily because they’re soft material threaded into a soft housing — using a wrench on them is the most common cause of stripped threads.… Read the Guide →