Category: Pool Pump Automation
Pool automation systems — Hayward OmniLogic, Pentair IntelliConnect and ScreenLogic, Jandy iAqualink — control the pump, lights, heater, and other equipment from a smartphone app or control panel. When automation is involved, a pump that won’t start or run at the right speed may have a control communication issue rather than a mechanical pump problem.
Automation failures often present as pump failures: the pump gets no command to run, runs at the wrong speed, or loses connection to the control system. Before opening the pump motor, verify the automation system can communicate with the pump — most systems have a diagnostic screen that shows the pump’s reported status. Variable speed pumps connected to automation systems require specific programming to operate correctly and can be deactivated by the control system as a safety response to abnormal conditions. This section covers pool automation troubleshooting as it relates to pump operation, reconnection procedures after outages, and manual override methods when the automation system fails.
-
Read the Guide →: Pool Pump Remote or App Not Connecting — Smart Pump Troubleshooting
Pool automation app won’t connect to your pump, or the physical remote stopped responding? Here’s how to troubleshoot connectivity separately from the pump itself. Read the Guide →
-
Read the Guide →: Pool Pump Automation Integration — Hayward, Pentair, and Jandy Systems Explained
Pool automation systems control your pump speed and schedule through a wired RS-485 communication link, not a simple on/off relay — this is what enables smartphone app control and variable-speed… Read the Guide →
-
Read the Guide →: Pool Pump Won’t Turn Off — Why It Keeps Running and How to Fix It
A pool pump that won’t turn off on its programmed schedule almost always has a stuck mechanical timer tripper, a relay with welded contacts, or an automation system override commanding… Read the Guide →
-
Read the Guide →: Pool Pump Won’t Restart After Power Outage — Fix It Fast
Pool pump dead after a storm or power outage? Usually a tripped GFCI, reset timer, or VS drive — not a fried motor. Free fixes, in order. Read the Guide →