Author: Keith S
-
Read the Guide →: Pool Pump Wiring Guide — 115V vs 230V, GFCI, and How to Connect It
Most residential pool pumps are wired for 230V on a dedicated 20-amp double-pole breaker with GFCI protection. The terminal block inside the motor has jumpers that configure 115V or 230V… Read the Guide →
-
Read the Guide →: Pool Pump Air Bubbles in Returns — What They Mean and How to Stop Them
Bubbles coming out of your pool return jets means air is getting into the suction side of the pump. About 55% of the time it’s the strainer lid O-ring. Apply… Read the Guide →
-
Read the Guide →: Pool Booster Pump Troubleshooting — Polaris and Cleaner Pump Fixes
Pool booster pump troubleshooting: it hums and won’t start (capacitor), seized bearings, leaks, and a cleaner that won’t move. What to fix first. Read the Guide →
-
Read the Guide →: Spa and Hot Tub Pump Troubleshooting — No Flow, Noise, and FLO Errors
Hot tub pump troubleshooting by symptom: FLO errors, airlocks after a refill, humming, and no flow. What each means and how to fix it safely. Read the Guide →
-
Read the Guide →: Intex Pool Pump Troubleshooting — Common Problems and Fixes
Intex pool pump troubleshooting: tripped GFCI, locked 8.8 display, thermal shutoff, and no flow. What each means and the fix, no tools needed. Read the Guide →
-
Read the Guide →: Pool Pump Timer Not Working — Fix Mechanical and Digital Timers
Pool pump timer not working? Test the manual override first, then check power, trippers, and the clock motor. Mechanical and digital fixes. Read the Guide →
-
Read the Guide →: Salt Water Pool Pump Problems — What’s Different and How to Fix It
Salt water pool pump trouble? It’s the same pump — salt just kills seals, O-rings, and bearings faster. What to watch and how to make it last. Read the Guide →
-
Read the Guide →: Variable Speed Pool Pump Troubleshooting — Errors and Fixes
Variable speed pool pump troubleshooting by symptom: dead display, error codes, weak flow, prime fail. What each means and the fix, free first. Read the Guide →
-
Read the Guide →: Pool Pump Won’t Restart After Power Outage — Fix It Fast
Pool pump dead after a storm or power outage? Usually a tripped GFCI, reset timer, or VS drive — not a fried motor. Free fixes, in order. Read the Guide →
-
Read the Guide →: Pool Pump High Pressure — What It Means and How to Fix It
High filter pressure on your pool pump? Usually a dirty filter, not the pump. Find the cause and drop the PSI safely in under an hour. Read the Guide →
-
Read the Guide →: Pool Pump Burning Smell — What It Is and What to Do Immediately
Pool pump burning smell? Cut the breaker, then check vents, capacitor, and motor windings. What each smell means and how to fix it safely. Read the Guide →